Bass Guitar Amplifiers

Blackstar HT-5 Series HT-5H and HT-110 Guitar Mini Half Stack

Blackstar HT-5 Series HT-5H and HT-110 Guitar Mini Half Stack

This mini half stack from the HT Series pairs the Blackstar HT-5H guitar amp head with the HT-110 speaker cab delivers great tone during practice or studio work at any volume level.The Blackstar HT-5H Guitar Amp Head The HT-5H tube guitar amp from Blackstar is ideal for studio work or practice, packing all the great tone and innovative features of the award-winning HT tube pedals into a 2-channel, footswitchable tube amp format. The patent-applied-for ISF (Infinite Shape Feature) circuit gives you infinite adjustment over the characteristics of the tone control network and takes your tone from the USA to the UK and any where in between. So now you can effectively design your own tone and finally find “that sound in your head.”In making the Blackstar HT-5H ideally suited to home and studio use, the aim was to develop a tube amp that sounded full in tone even at the lowest volume level. With this in mind Blackstar designed a brand-new tube power amplifier topology. The HT-5H power amplifier is a low-powered, push-pull design that produces the crunch and breakup characteristics of a traditional 100W output but at a much lower volume via its 12BH7 dual-triode in push-pull configuration producing 5 watts output and delivers rich harmonics and compression.The HT-5H amplifier head also has a fully specified speaker-emulated output, further enhancing its studio credentials and allowing any guitarist to get amazing tube tone straight to tape or disk, or through headphones. It also features the unique 4×12/1×12 voicing switch, allowing you to change the tonal characteristics of the emulated signal between 2 emulated cabinet types.Add to this an effects loop with switchable level, along with 16-ohm and 8-ohm speaker outputs allowing you to run the amp into an external speaker cabinet of your choice, and you have everything you need for recording or practicing.The HT-110 Cabinet The Blackstar HT-110 speaker cabinet packs 40W RMS and a 10″ Celestion speaker for su

Blackstar HT-5 Series HT-5H and HT-110 Guitar Mini Half Stack (Standard)

Egnater Tourmaster 4100 Guitar Amp Head and Tourmaster 412A

Egnater Tourmaster 4100 Guitar Amp Head and Tourmaster 412A

Get the Egnater Tourmaster 4100 Guitar Amp Head and Tourmaster 412A 4×12 Guitar Extension Cabinet together now at one great price.Tourmaster 4100 Guitar Amp Head Each of the Tourmaster 4100 amp head’s channels has an identical set of controls, but that is where the similarities end.Clean/Vintage 1 is the cleanest of the four. Within this channel lives a range of Classic tones ranging from pristine sparkle with the voicing switch set to MODERN to a punchy, aggressive drive (think clean JTM) in the CLASSIC mode. Pressing the button to activate the CONTOUR control opens an entire new range of beautiful clean, almost acoustic, tones not often found in a tube amplifier.Clean/Vintage 2 has a very similar voicing to the Clean/Vintage 1 channel. This channel has more gain, so it can be pushed into mild overdrive. Sweet blues and classic rock tones are easily coaxed out of this channel. The contour knob adds another level of unique flavors.Overdrive 1: From AC/DC crunch to modern rock, this channel covers a lot of bases all by itself. Dial down the gain and the feel is pure classic rock. Push the gain and enter into more modern, saturated territory. Scoop the mids with the CONTOUR control for monstrous metal or set it for classic British rhythm.Overdrive 2: The Tourmaster’s most intense channel, you’ll find ferocious gain with a wide range of tones to suit the ’80s shredder as well as the heaviest modern metal player. Scoop the mids with the powerful CONTOUR control for massive crunch or push the midrange for a solo tone that cuts through with serious authority.Power Grid: This is a really cool feature you will only find on the Egnater Tourmaster amps. Using a group of 5 slide switches on the rear panel, you can set the power output for each channel individually. There is a 3-position slide switch corresponding to each of the four channels and a single FULL POWER/ HALF POWER slide switch. In FULL POWER mode, you can choose between 100w, 50w or 25w per channel

Egnater Tourmaster 4100 Guitar Amp Head and Tourmaster 412A 280W 4×12 Guitar Extension Cabinet (Standard)

Gallien-Krueger Backline 600/Goldline 4×10 Stack (Standard)

Gallien-Krueger Backline 600/Goldline 4x10 Stack (Standard)

The Gallien-Krueger Backline 600 Bass Head can handle the wear and tear of touring. Features 300W of thunder, 4-band active EQ, adjustable contour, effects loop, Boost valve effect, XLR out with ground and pre/post switch, and tuner out. 2-year warranty.The Gallien-Krueger Goldline 410GLX Bass Cabinet is loaded with Paragon Goldline aluminum cone loudspeakers designed and manufactured by GK. Goldline audio speakers are designed to deliver a rich, warm, golden tone with a little extra sparkle in the top end. Front slot-porting is used for enhanced low bass response. Special care has been taken in the cabinet design to eliminate standing waves so that nothing gets in the way of your performance. The result is a thick low-end with a smooth, even response across the entire frequency spectrum. The Goldline 410 speaker cab features black carpet coverings, recessed, spring-loaded handles, rugged steel grille, custom interlocking corners and removable casters.

Gallien-Krueger Goldline 500 Bass Head and 4×10 Bass Cabinet

Gallien-Krueger Goldline 500 Bass Head and 4x10 Bass Cabinet

Gallien-Krueger’s Goldline 500 Bass Head and Amplifier are available in a single package designed to deliver GK’s warm, punchy tone and plenty of power.The Goldline 500 Bass Amp Head The Goldline 500 was developed by Gallien-Krueger to complement the look and tone of the GLX series bass enclosures. It features a 500-watt, solid state amplifier and a foot-switchable boost “valve effect” channel. Gate-Induced Valve Effect, or G.I.V.E. technology, was developed by Bob Gallien in 1972 and is part of what gives GK its distinctive sound. This amplifier is made using the same quality components as GK’s professional products, such as a high-current power supply for maximum punch and a toroidal transformer for greater efficiency. The adjustable contour and active four-band EQ make it simple to dial in a great sound. The Goldline 500 Amp Head delivers a warm, punchy tone with a fast transient response that not only sounds better, but feels better. The Goldline series is the perfect marriage of affordability and outstanding quality.The Goldline 410GLX Bass Speaker Cabinet: The Gallien-Krueger Goldline 410GLX Bass Cabinet is loaded with 4×10″ Paragon Goldline aluminum cone loudspeakers designed and manufactured by GK. Goldline audio speakers are designed to deliver a rich, warm, golden tone with a little extra sparkle in the top end. Front slot-porting is used for enhanced low bass response. Gallien Krueger has given special care to the cabinet design in order to eliminate standing waves so that nothing gets in the way of your performance. The result is a thick low-end with a smooth, even response across the entire frequency spectrum. The speaker cabinet features black carpet coverings, recessed, spring-loaded handles, rugged steel grille, custom interlocking corners and removable casters.

Gallien-Krueger Goldline 500 Bass Head and 4×10 Bass Cabinet Package (Standard)

Tech 21 BSDR SansAmp Bass Driver DI

Tech 21 BSDR SansAmp Bass Driver DI

Pre-amp, stomp box and DI all in one. Dial up big vintage tube tones, bright modern slap sounds, gnarly distortions, and all in between.

Tech 21 BSDR-DLX SansAmp Bass Driver Deluxe

Tech 21 BSDR-DLX SansAmp Bass Driver Deluxe

6-channel, dual input pre-amp, stomp box and DI all in one. Dial up big vintage tube tones, bright modern slap sounds, gnarly distortions, and all in between.

Tech 21 PBDR SansAmp Programmable Bass Driver DI

Tech 21 PBDR SansAmp Programmable Bass Driver DI

3-channel pre-amp, stomp box and DI all in one. Dial up big vintage tube tones, bright modern slap sounds, gnarly distortions, and all in between.

Rocktron Digital Bsss Preamp with Effects Black

Rocktron Digital Bsss Preamp with Effects Black

There?s a new storm on the horizon and it?s called BLUE THUNDER?. Rocktron?s Blue Thunder bass preamp has been specifically designed and voiced for bass and is a live and studio tool that is a “must have” for all bass players. The Blue Thunder? is loaded with 128 professional Presets custom designed for bass. The Blue Thunder has a selectable Hi-Pass Effects Filter that allows you to determine the frequency range being passed through the digital effects, delivering lush effects that won?t muddy up your low end. Custom voiced bass effects including flanger, phaser, tremolo, delay and reverb.. Rocktron’s Dynamic Compression is included and has also been specifically engineered for bass. If that?s not enough, Rocktron’s Multi-voiced delay and chorus are again specifically voiced for bass use in live and recording situations. Want some distortion? The Blue Thunder? rolls out built-in distortion designed specifically for bass which can be added to your dry bass signal and effect path independently as desired. Rocktron’s unique signal routing allows you to choose between an analog direct feed, or full effects routing. The Blue Thunder? has a most powerful and flexible tone shaping tool with Rocktron’s SIMbiotic  4-Band Parametric EQ consisting of two sections of band limited parametric EQ ? “BASS” and “PRESENCE” along with two sections of FULL BASS Paremetric EQ sections ? “MID” and “TREBLE”. Speaker Exciter with Sonic Clarity and Sonic Boom co…

Aguilar Tone Hammer Bass Preamp Direct Box

Aguilar Tone Hammer Bass Preamp Direct Box

This preamp/direct box is so strong and powerful it could only be called the “Tone Hammer”! Based on the respected OBP-3 preamp, the Tone Hammer features fully sweepable midrange frequencies in addition to bass and treble controls. With the Tone Hammer’s pristine D.I. you are set for the studio or the stage. To give this tone shaping unit the ultimate flexibility we are introducing our proprietary Adaptive Gain Shaping circuitry (AGS). AGS allows the player to kick in an additional gain structure and EQ with the “stomp” of a button. You can now go from modern slap sounds to vintage or overdriven. 18 volt operation gives the Tone Hammer plenty of headroom to reproduce the most dynamic playing style. Separate “Gain” and “Master” controls allow you to dial in just the right gain structure for any instrument. The Tone Hammer is the essential preamp/direct box for every bassist’s tool box. Specs: Pre/Post DI Unbalanced output can drive a power amp AGS circuitry Cut and boost of treble, mid and bass frequencies Fully sweepable midrange frequencies Powered by two nine volt batteries, phantom power or optional universal power supply Ground lift switch Heavy Duty steel construction Inputs: One 1/4″ jack Outputs: One 1/4″ jack, One XLR (nominal output – 14 dBu balanced) EQ: Bass +/- 18 dB @ 40 Hz Mid +/- 17 dB @ 180 Hz to 1 kHz Treble +/- 18 dB @ 4 kHz Controls: Ground lift switch Pre/Post DI switch Engage switch AGS switch Warranty: Three year limited Optional: Aguilar Tone Hammer Universal 18 volt power supply

BBE BMAX-T Groove Tube Bass Guitar Preamp with Full-Featured

BBE BMAX-T Groove Tube Bass Guitar Preamp with Full-Featured

Bassists seeking the ultimate in electric bass preamplification will rejoice in the arrival of the BMAX-T. No other bass preamp on the market can approach the total quality, feature set and incredible tone of the BMAX-T. The BMAX-T is a high quality tube bass preamp/processor with applications both in the recording studio and on the road in demanding live applications. At the heart of the BMAX-T is a class A, DC regulated tube preamp section which follows in the tradition of the classic tube preamp designs of the 50’s and 60’s. The BMAX-T features a high voltage (300V) tube front end with hand-picked Groove Tubes 12AX7 tube, providing all of the pre-amp gain and passive interactive tone control. The high-end DI section is transformer-balanced with a genuine Jensen transformer for the ultimate in warmth and presence. 1% metal film resistors, military-spec PC board and custom-made toroidal power transformer complete the no-compromise design of the BMAX-T. While no expense was spared in the engineering and internal componentry, the packaging of the BMAX-T received the utmost attention to detail. From the 1/4” thick extruded front panel to thoughfully designed ergonomics to the red-abalone-topped knobs, the fit and finish of the BMAX-T exudes quality craftsmanship. Applications • The BMAX-T is perfect anywhere an extremely high-quality, pristine preamplifier is required for the bass guitar • In the recording studio where a bass amplifier is impractical due to space or loudness considerations • In performance applications, where players will find the BMAX-T ergonomics intuitive and easy to use

BBE BMAX-T Groove Tube Bass Guitar Preamp with Full-Featured Sonic Maximizer